How to Use a Torch Waterfall Backflow Incense Burner

By Zenbless- Awareness and Life-Changing Experience | Published: 2026-10-29

Category: How-to Guides

Learn how to set up and use a torch waterfall backflow incense burner for a calming smoke waterfall effect. Step-by-step guide with tips for best results.

Quick answer

Place a backflow incense cone on the top opening of the torch burner, light the tip, let it burn for 10 seconds, then blow out the flame. The thick smoke will flow down the ceramic body like a waterfall.

Why the torch design works differently

The torch waterfall burner has a tall, narrow chimney that channels smoke downward through a hidden internal path. This creates a concentrated, steady stream that mimics a waterfall better than open-lid burners.

Because the opening is small, you must use backflow cones (not regular incense) and ensure the cone tip fits snugly. A loose fit lets smoke escape sideways instead of flowing down.

Step-by-step setup for your torch waterfall burner

Choose the right cone: Use only backflow incense cones — they have a hole at the bottom that forces smoke downward. Regular cones will produce smoke that rises and escapes. Check that the cone base fits the burner opening without gaps.
Light the cone properly: Hold a lighter to the tip of the cone until it glows and a small flame appears. Let it burn for about 10 seconds, then gently blow out the flame. A glowing ember should remain. If the ember goes out, relight and let it burn a few seconds longer before blowing.
Place the cone on the burner: Set the cone onto the top opening of the torch burner. Make sure it sits flat and centered. The smoke should begin flowing down the sides within 15–30 seconds. If smoke rises instead of falling, the cone may not be a backflow type or the opening may be blocked.
Position for best effect: Place the burner on a stable, heat-safe surface away from drafts. A still room lets the smoke waterfall flow straight down without breaking apart. Avoid placing near fans, air conditioners, or open windows.
Let it burn completely: A backflow cone typically burns for 15–25 minutes. Do not disturb the burner while it is lit. Let the cone burn out naturally. Never leave a burning cone unattended. Keep away from flammable objects.

Our recommended burner

Torch Waterfall Backflow Incense Burner with 20pcs Incense Cones: Ceramic construction, 9.6 cm x 9.6 cm x 19.8 cm. The thick smoke flow looks like water and replicates the sights of a tranquil waterfall. The ceramic material holds heat evenly, helping the backflow effect last through the entire cone burn without sputtering.
Torch Waterfall Backflow Incense Burner with 20pcs Incense Cones